- Circuit Breakers[10]
- Other Electrical Equipment[1]
- Contactors[8]
- Temperature Instruments[3]
- Relays[6]
- Fuses[5]
- Underwater Lights[1]
- Wall Lamps[1]
- Lamp Holders & Lamp Bases[1]
- Energy Saving & Fluorescent[1]
- Energy Meters[6]
- Voltage Meters[1]
- Transformers[6]
- Terminal Blocks[4]
- Connectors[1]
- Terminals[2]
- Fuse Components[3]
- Other Switches[2]
- Wall Switches[5]
- Power Accessories[2]
- Hydraulic Tools[6]
- Inverters & Converters[1]
- Voltage Regulators/Stabilizers[2]
- Power Distribution Equipment[7]
- Other Wiring Accessories[3]
- Cable Clips[3]
- Other Hand Tools[2]
- Cable Ties[2]
- Tie Mounts[1]
- Velcro Tapes[2]
- Power Cords & Extension Cords[2]
- Electrical Wires[1]
- Power Cables[4]
- Push Button Switches[7]
- Electrical Plugs & Sockets[7]
- Cable Conduits[1]
- Other Connectors & Terminals[1]
- Integrated Circuits[1]
- Contact Person : Ms. Huang Amy
- Company Name : FATO Mechanical & Electrical Equipment Group Co., Ltd.
- Tel : 86-577-62731688
- Fax : 86-577-62729633
- Address : Zhejiang,Wenzhou,No. 2 Liuqing Road, Liushi,Yueqing, Zhejiang, 325604,China
- Country/Region : China
- Zip : 325600
Mini Circuit Breaker (New) CE approval suitalbe for AC, DC
FATO MECHANICAL AND ELECTRICAL CO., LTD. is a professional manufacturer of series of circuit breakers in China.
DZ47/C45 series Mini Circuit Breaker (new type)
APPLICATION
The DZ47 series mini circuit breaker can be used for overload and short circuit protection of circuit ,illumination and power equipment in circuit of AC 50Hz or 60Hz with rated voltage for 230/400V rated current to 100A and below. It can also be used for the infrequent on-off changeover for the circuit and equipment under normal conditions.
The product conforms to IEC60898, GB10963 standard.
STRUCTURE FEATURES
This series circuit breaker is composed by plastic enclosure, over-current release, operating mechanism, contact and arc extinguish system etc. The enclosure is injected by high strength, and high flame-resistant plastic .
The multi pole circuit breakers are assembling by many single-pole, the trip is connected with the joint bar, the handle was united with the linkage cover, has guaranteed the uniformity of each make-and-break.
WORKING CONDITION
1. Altitude less than 2000m
2. Ambient atmosphere temperature :-5°C~40°C and the average temperature is not more that 35°C during 24 hours
3. Relative humidity of ambient temperature is less than in 40°C, the humidity can be large under rather lower temperature. The largest monthly average is 90% with the lowest temperature is 25°C. The curd on the appearance should be considered as the temperature changed.
4. Pollution grade 3
5. Mounting category : III
6. Mounting type: Adopts TH35-7.5 type mounting rail.
7. Mounting angle: vertically (mounting panel and ground) , tolerance should be less than 5°
MAIN SPECIFICATION AND TECHNICAL PARAMETERS
3.1 TYPE AND MEANING
MAIN TECHNICAL PARAMETERS
Model | pole | Rated voltage (V) | Rated current In(A) | Rated short-circuits breaking capacity (KA) | Instant release and non release current | Biggest section of connecting wire (sqmm) | Mechanical life (times) | Standard |
DZ47-63 | 1,2, 3,4 | 230/400 | 1,3,6,10,16, 20,25,32,40 | 6 | C (5-10)In D (10-14)In | 25 | 2000 | IEC60898 GB10963 |
50,63 | 4.5 | |||||||
DZ47-100 | 1,2, 3,4 | 230/400 | 50,63, 80,100 | 10* | C (5-10)In D (10-14)In | 35 |
l The data is the rated limit short-circuit breaking capacity Icu.
Over-current time and action characteristic Table 2
Experiment | Pattern | Experimental current | Initial state | Limit time of releases or non release | anticipated result | Experiment ambient temperature °C |
a | C,D | 1.13In | cold condition * | t≥1h(In≤63A) | not release | 30°C~50°C |
t≥2h(In>63A) | ||||||
b | C,D | 1.45In | experiment closely following item a | t≤1h(In≤63A) | releases | 30°C~50°C |
t≤1h(In>63A) | ||||||
c | C,D | 2.55In | cold condition * | 1s<t<60s(In≤32A) | releases | 30°C~50°C |
1s<t<120sIn>32A) | 30°C~50°C | |||||
d | C | 5 In | cold condition * | t>0.1s | not release | 30°C~50°C |
D | 10In | |||||
e | C | 5In | cold condition * | t≤0.1s | releases | 30°C~50°C |
CHARATERISTIC CURVE
OUTER AND MOUNT DIMENSION
1. Wire Guides 2. Lock catch 3. Axis 4. Spring 5. Handle 6. Axis 7. Base 8. U-type connecting rod/ connection
9. Tripping bar / jump a pin 10. Indication part 11. Themoelement 12.Contact 13.Cap 14. Rivet 15. Arc extinguish
16. Flash barrier / Din Clip 17. Snap-gauge 18.LENS 19. Cover 20. Insulation Covering 21. Taper Knob/ Handle Covering
Qualified goods, competitive price.
We supply the best to you.
CE certificated
FATO MECHANICAL AND ELECTRICAL CO., LTD. is a professional manufacturer of series of circuit breakers in China. Since founded in 1987, we have been devoted to the technical revolution for our goods. If you have any detailed requirement on the goods you need, don't hesitate to let us know. Our engineer team would do their best to satisfy you.
WE ARE DEVOTED TO THE INNOVATION OF TECHONOLOGY
NEW C45/DZ47 for DC electricity
DZ47/C45DC mini circuit breaker was developed on the basis of DZ47/C45 AC,which is used in the application of the DC electricity system.
Compared to the other series of DC circuit breakers, it has the following features:
1. competitive in price
2. good in quality
3. stable in performance
widely used in the DC electrical system
For details as well as the price, please contact with our sales.
We can make the circuit breakers according to your detailed requirement.
Mini Circuit Breaker (New) CE approval suitalbe for AC, DC